Changing The Saw Blade - Mafell KSS40 18 M bl Operating/Safety Instructions Manual

4.6 Changing the saw blade

Use the following procedure to change the saw
blade:
1. Pull the rechargeable battery out of the
machine.
2. Put the machine on a flat surface.
3. To move the movable guard to the maximum
open position, either use the pre-feed lever (3)
or do it manually.
To remove the saw blade, manually hold
➢
the guard in the open position.
4. Press and hold the locking pin (11).
18
Caution
Risk of injury from the sharp saw blade
The saw blade is sharp. You can hurt yourself when you change the saw blade.
Wear protective gloves when you change the saw blade.
➢
➢ Be careful when you change the saw blade.
Fig. 8: Opening the guard
Fig. 9: Actuating the locking pin
KSS40 18 M bl
01/2022