Saw Blade Selection; Changing The Saw Blade - Mafell PSS 3100 SE Operating/Safety Instructions Manual

4.4 Saw blade selection

To achieve good cutting quality, use a sharp tool and select a tool from the following list that is appropriate for
material and application:
Cutting solid wood:
- Carbide circular saw blade Ø 160 x 1.8 x 20 mm, 16 teeth [Ø 6.30 x 0.07 x 0.79 in]
Cutting solid-wood panels, chipboards, cement-bonded chipboards, and multiplex boards:
- Carbide circular saw blade Ø 160 x 1.8 x 20 mm, 24 teeth [Ø 6.30 x 0.07 x 0.79 in]
Cutting solid-wood panels, chipboards, multiplex boards, gypsum fiber boards, HDF, MDF and OSB
boards:
- Carbide circular saw blade Ø 162 x 1.8 x 20 mm, 32 teeth [Ø 6.38 x 0.07 x 0.79 in]
Cutting chipboards, overlaid boards, HPL laminate, HDF, MDF and OSB boards:
- Carbide circular saw blade Ø 160 x 1.8 x 20 mm, 56 teeth [Ø 6.30 x 0.07 x 0.79 in]
Cutting fiber cement board:
- Diamond saw blade Ø 160 x 3.0 x 20 mm, 4 teeth [Ø 6.30 x 0.12 x 0.79 in]
A diagram attached to the control panel shows suitable "material – saw blade – feed speed"
combinations.
Use it for reference when choosing a saw blade.

4.5 Changing the saw blade

16
Caution
Risk of injury from the sharp saw blade
The saw blade is sharp. You can hurt yourself when you change the saw blade.
➢ Wear protective gloves when you change the saw blade.
Be careful when you change the saw blade.
➢
PSS 3100 SE
01/2022