Configuring Audio Devices - PRESONUS AudioBox USB 96 Owner's Manual

4
Studio One Artist Quick Start
Setting Up Studio One
4.2
4.2.1 Configuring Audio Devices 配置音频设备
PreSonus Web site.
Studio One Artist 是为使用PreSonus界面而设计的，并提供独特的互
操作性和简化的设置。当 Studio One Artist 启动时，默认的情况下，
你将被带到开始页面。在这个页面上，你将发现文档管理和设备配置控
制，以及一个可定制的艺术家配置文件，新闻提要，和相关 PreSonus
演示和教程的链接。如果你的计算机连接到网络上，这些链接将随着
PreSonus 网站上新的教程的出现而更新。
Complete information on all aspects of Studio One Artist is
available in the Reference Manual PDF located in the Studio One
Help menu. The information in this tutorial covers only the basic
aspects of Studio One Artist and is intended to get you set up and
recording as quickly as possible.
关于所有 Studio One Artist 相关的完整信息，可以在位于 Studio
One Help menu（帮助菜单）的PDF参考手中找到。本教程中的信息只涵
盖了 Studio One Artist 的基本方面，旨在让你尽快设置和录音。
In the middle of the Start page, you will see the Setup area. Studio
One Artist automatically scans your system for all available drivers
and selects a driver. By default, it will choose a PreSonus driver if
one is available.
在 Start 页面的中间，你将看到设置区。Studio One Artist 自动扫
描你的系统中所有可用的驱动程序，并选择一个驱动程序。默认情况下，
它将选择一个PreSonus 驱动程序 (如果有的话)。
Click on the Configure Audio Interface link to select your audio
interface driver.
单击 Configure Audio Interface 链接以选择音频接口驱动程序。
Select the AudioBox USB96 from the Audio Device pull-down
menu. From this page, you can also adjust your device buffer
block size. Click OK when you are finished.
从 Audio Device下拉菜单中选择 AudioBox USB96。从这个页面，你还
可以调整设备缓冲区块大小。完成后单击 OK。
AudioBoxUSB®96
Owner'sManual
18