Configuring Audio Devices; Configuring Midi Devices - PRESONUS Quantum series Owner's Manual

Ultra-low latency thunderbolt audio interfaces and studio command centers
Hide thumbs Also See for Quantum series:
Table of Contents

Advertisement

6
Studio One Artist Quick Start
6.2
Setting Up Studio One

6.2.1 Configuring Audio Devices

6.2.2 Configuring MIDI Devices

1. In the middle of the Start page, you will see the Setup area. Studio One
Artist automatically scans your system for all available drivers and selects
a driver. By default, it will choose a PreSonus driver if one is available.
2. If you do not see your device listed on the Start page when
you launch Studio One, click on the Configure Audio Devices
link in the Setup area to open the Options window.
In the Options window, click on the Audio Setup tab and
select your device driver from the pull-down.
From the External Devices window in Studio One Artist, you can configure
your MIDI keyboard controller, sound modules, and control surfaces. This
section will guide you through setting up your MIDI keyboard controller
and sound modules. Please consult the Reference Manual located within
Studio One for complete setup instructions for other MIDI devices.
If you are using a third-party MIDI interface or USB MIDI-controller
keyboard, you must install any required drivers for these devices before
beginning this section. Please consult the documentation that came
with your MIDI hardware for complete installation instructions.
If you do not have any MIDI devices, please skip to Section 6.3.
Quantum-series
Owner's Manual
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents