Configuring Audio Devices 配置音频设备 - PRESONUS AudioBox GO Owner's Manual

4.3 Configuring Audio Devices 配置音频设备
In the middle of the Start page, you will see the Setup area. Studio One Prime automatically scans your
system for all available drivers and selects a driver. By default, it will choose a PreSonus driver if one is
available.
在开始页面的中间，你会看到设置区域。Studio One Prime 会自动扫描你的系统，寻找所有可用的驱
动程序，并选择一个驱动程序。默认情况下，如果有 PreSonus 的驱动程序，它将选择一个。
If you do not see your device listed on the Start page when you launch Studio One, click on the Configure
Audio Devices link in the Setup area to open the Options window.
如果你在启动 Studio One 时，没有看到你的设备列在 "开始" 页面上，点击设置区的 "Configure Audio
Devices 配置音频设备" 链接，打开选项窗口。
In the Options window, click on the Audio Setup tab and select your device driver from the pull-down.
在 "Options 选项 " 窗口，点击 "Audio Setup 音频设置 "标签，从下拉菜单中选择你的设备驱动程序。
4.4 Configuring MIDI Devices 19