Overview; Functional Description; Technical.specifications - FLORABEST FRM 1800 A1 Original Operation Manual

- 4 screws to attach the bar
- 2 wing nuts and screws for attaching
the curved handle
- 2 butterfly nuts for attaching the curved
handle
- 2 holders to attach the
connection cable
- Manual

Overview

1 Curved handle
A
2a Butterfly nuts
2b Wing nuts
3 Lower bar
4 Grass bag
5 Cut height adjusting lever
6 Wheels
7 Lawnmower housing
8 Handle
9 Collision guard
10 Cable holder
11 Release button (not visible)
12 Power cable outlet
13 Cable strain relief
14 Power cable
15 Start lever
Function Description
The electric lawnmower has a cutting tool,
which turns parallel to the cutting level. It is
equipped with a high performance electric
motor, robust plastic housing, safety switch,
collision guard, and grass bag. Addition-
ally, the equipment is height adjustable to
six levels and has smooth-running wheels.
For the function of the operating parts,
please refer to the descriptions below.
Technical
specifications
Electric.Lawnmower... FRM.1800.A1
Motor input power .....................1800 W
Mains voltage ................... 230V~, 50 Hz
Idling speed ...........................3250 min
Blade width ...................Approx. 440 mm
Cut height ............................20 – 70 mm
Protection class .................................
Protection type ................................IP 24
Weight ......................................15.1 kg
Lawn bag volume ............................. 55 l
Sound pressure specification
(L ) ...........86.9 dB(A); K
pA
Noise level specification
measured (L
WA
............... 93.9 dB(A); K
guaranteed ........................ 96.0 dB(A)
Vibration on the handle
(a ) ..................2.07 m/s
n
Do not exceed the maximum permitted
network impedance of 0.277 Ohms at the
electrical connection point
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may also
be used for a preliminary exposure assess-
ment.
Warning:.The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on esti-
mated exposure under actual usage
conditions (all parts of the operating
cycle are to be considered, includ-
ing, for example, times during which
the power tool is turned off and times
when the tool is turned on but is run-
ning idle).
The noise and vibration values have been
determined in accordance with the standards
and regulations specified in the declaration
of conformity.
Technical and visual modifications may be
made without notice in the course of further
development. All dimensions, information
-1
and specifications in these operating instruc-
= 2.26
pA
)
=2.26
wA
; K= 1.5 m/s²
2
GB
II
dB(A)
dB(A)
45