General Description; Scope Of Delivery; Overview; Functional Description - FLORABEST FRM 1200 D3 Translation Of The Original Instructions

General Description

Scope of Delivery

Carefully remove the equipment from the
packaging and check whether the follow-
ing parts are complete:
- Lawnmower and curved handle with
connection cable
- Lower bar
- Lawn box (in three parts)
- 2 screws to attach the bar
- 2 wing nuts and screws for attaching
the curved handle
- 2 holders to attach the
connection cable
- 4 wheels with 4 fixing screws
- Instruction Manual

Overview

1 Curved handle
A
2 Wing nuts
3 Lower bar
4 Grass box
5 Wheels
5.1 Fittings
6 Lawnmower housing
7 Collision guard
8 Cable holder
10 Release button
11 Cable strain relief
12 Start lever
B
13 Screws for lower bar
C
14 Screws for curved handle
D
15 Handle
16 upper part of grass box
20 Level gauge
I
17 Blade screw
18 Blade
19 Motor spindle
Function Description
The electric lawnmower has a cutting tool,
which turns parallel to the cutting level. It is
equipped with a high performance electric
motor, robust plastic housing, safety switch,
collision guard, and grass box. Addition-
ally, the equipment is height adjustable
to three levels and has smooth-running
wheels.
For the function of the operating parts,
please refer to the descriptions below.
Technical
Specifications
Electric Lawnmower .. FRM 1200 D3
Motor input power .....................1200 W
Mains voltage .. 220 V-240 V~, 50/60 Hz
Idling speed ........................... 3350min
Blade width ................................. 31 cm
Cut height ................... 20 / 40 / 60 mm
Protection class ................................
Protection type ............................... IP 24
Weight ........................... approx. 8.8 kg
Lawn box volume ............................. 30 l
Sound pressure specification
(L ) ....................... 84 dB (A); K
pA
Noise level specification
measured .............. 94 dB (A); K
guaranteed ............................. 96 dB (A)
Vibration on the handle
(a ) ....................... 2.1 m/s
h
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may also
be used for a preliminary exposure assessment.
GB IE NI
= 3 dB
pA
(L )
WA
= 2 dB
WA
; K=1,5 m/s²
2
-1
II
5