Package Contents - Omron V530-C300E Operation Manual

Package Contents

Installing the Video Monitor
2-Dimensional Code
Regulations and Standards
4 Package Contents
Confirming Package Contents
This precaution applies to using the recommended Video Monitor
(F150-M09). The case of the Video Monitor is connected to the 0-V
line of the internal circuits. Observe the following precautions to pre-
vent noise penetration if the case is made of metal.
• Do not ground the Video Monitor.
• Do not ground the metal portion of the connector.
• If the Video Monitor is installed on a metal surface, secure it with
plastic.
• The blank margin (quiet zone) is necessary around 2-dimen-
sional codes. Four cells are required for Data Matrix and QR
Code.
• Set the code size so that only one code is picked up. Reading
cannot be performed correctly if more than one code is on the
screen.
The V530-C300E complies with the EC Directive and EN standards
listed below.
• EC Directive
EMC Directive: No. 89/336/EEC
• EN Standards (European Standards)
EN61326: 1997/Annex A+A1: 1998 (EMI: Class A),
EN61000-6-2: 1999, EN50081-2: 1993
Check the contents of the package as soon as you receive the V530-
C300E.
Contact the nearest OMRON representative if any of the following
items are missing.
• V530-C300E 2-Dimensional Code Reader Controller
• Operation Manual (this manual)
4
xv