Saving to Flash Memory
5-6
Saving to Flash Memory
Procedure
1,2,3...
120
Be sure to save revised setting data to flash memory before power is
turned OFF.
As the V530-C300E loads data from flash memory at startup, any
new data will be lost if it is not saved to flash memory. Also, images in
RAM are cleared when power is turned OFF.
1.
Display the basic screen.
2.
Move the cursor to MON (monitor) and press ENT.
3.
Select SAVE.
RUN
RUN
SET
---
RUN
SYS
TOOL
SAVE
Section 5-6
Freeze (1)
Freeze (1)