Coupler; No Parts Required - Toro 41621 Operator's Manual

x 1 inch), 2 bolts (3/8-16 x 2 1/4 inch), and 6
flange nuts (3/8-16 inch) as shown in
Figure 13
1. Bolt (3/8-16 x 1 inch)
2. Reel-shelf support bracket
6. Insert the reel shelf frame into the slots onto the
reel-shelf support bracket and secure the shelf
using 4 shoulder bolts, 4 flange nuts (5/16-18
inch), 2 bolts (5/16-18 x 1 inch), and 2 jam nuts
(5/16-18 inch) as shown in
Figure 14
1. Flange nut (5/16-18 inch)
2. Shoulder bolt
7. Apply PTFE tape to the threads on the pressure
gauge and install the pressure gauge assembly
as shown in Figure
Figure
3. Bolt (3/8-16 x 2 1/4 inch)
4. Flange nut (3/8-16 inch)
Figure 14.
3. Jam nut (5/16-18 inch)
4. Bolt (5/16-18 x 1 inch)
15.
13.
1. Pressure gauge
2. Pressure gauge reducer
g027956
8. Tighten the bolts on the pressure-gauge support
bracket against the reel-shelf frame.
4
Assembling the Optional
Rinse Tank
Multi Pro 5800 Turf Sprayers
with the Optional Rinse-Tank Kit
Installed

No Parts Required

Installing the Rinse Tank
g027957
1. Align the hold-down bracket with the reliefs
molded into the top of the rinse tank
9
Figure 15
3. Pressure gauge support
bracket assembly

4. Coupler

(Figure
g027958
16)