Table of Contents
Advertisement
Figure 9
1. Bolt (1/4-20 x 3/4 inch)
2. Upper bracket
3. Nut (1/4-20 inch)
2.
Secure the back side of the upper bracket using
1 U-bolt, 1 bolt (3/8-16 x 1 inch), and 3 flange
nuts (3/8-16 inch) as shown in
Figure 10
1. Bolt (3/8-16 x 1 inch)
2. Flange nut (3/8-16 inch)
Note:
If a rinse tank was removed before
installing the upper bracket, install the rinse tank
before proceeding to the next step.
3.
Mount the lower bracket and lower support
bracket to the frame using 2 bolts (3/8-16 inch),
2 bolts (3/8-16 x 3 1/2 inch), and 4 flange nuts
(3/8-16 inch) as shown in
g027953
4. Flange nut (5/16-18 inch)
5. Whiz bolt (5/16-18 x 1
inch)
Figure
10.
g027954
3. U-bolt
Figure
11.
1. Bolt (3/8-16 inch)
2. Lower support bracket
3. Flange nut (3/8-16 inch)
4.
If your machine has the optional rinse tank kit
installed, align the tank to the machine as shown
in figure
(Figure
Note:
You will complete the rinse tank
installation in
Installing the Rinse Tank (page
1. Optional rinse tank
2. Down
5.
Secure the reel-shelf support bracket to the
upper and lower brackets using 4 bolts (3/8-16
8
Figure 11
4. Lower bracket
5. Bolt (3/8-16 x 3 1/2 inch)
12).
Figure 12
3. Forward
g027955
9).
g244760
Advertisement
Table of Contents
