Toro 41621 Operator's Manual page 16

Assembling the Control Valve
Multi Pro 5800 Turf Sprayers—2016 and After
1. Align the flange of the T-fitting with the flange
of the 90° fitting with a connector for the sense
tube (Figure 34).
Figure 34
1. Flange clamps (with
gasket)
2. 90° fitting (section-valve
bypass)
3. Flange head bolt (6 x 16
mm)
4. Control-valve bracket
2. Loosely assemble the T-fitting and the 90° fitting
with a gasket and a flange clamp
3. Assemble the control-valve bracket to the
manifold mount (Figure
bolts (6 x 16 mm) and 4 flange locknuts (6 mm);
torque the bolts to 10 to 12 N∙m (86 to 106 in-lb).
4. Tighten by hand the flange clamp that secures
the control valve and the T-fitting
and the flange clamp that secures T-fitting to the
90° fitting with a connector for the sense tube
(Figure 31 and Figure
5. Connect the 3-socket connector for the pressure
transducer (Figure
5. Manifold mount
6. Flange locknut (6 mm)
7. Hose clamp
8. Hose (section-valve
bypass)
(Figure 34).
35) with 4 flange head
(Figure 29)
34).
35).
1. 3-socket connector
6. Assemble the spray-wand hose onto the
barbed-hose fitting of the control valve, and
g033917
secure the hose to the fitting with a hose clamp
(Figure 36).
1. Barbed-hose fitting
(control valve)
2. Hose clamp
16
Figure 35
2. Pressure transducer
Figure 36
3. Spray-wand hose
g033985
g033915