Toro 41621 Operator's Manual page 6

Figure 3
1. Retainer fork
2. 90° fitting (supply hose)
4. Remove the 90° fitting from the bulkhead fitting
(Figure 3).
5. Remove the 2 bolts, 4 washers, and 2 flange
locknuts that secure the 2 hold-down brackets
for the rinse tank to the valve mount, and remove
the hold-down brackets
Figure 4
1. Washer
2. Bolt
6. Remove the rinse tank from the machine
5).
g244766
3. Bulkhead fitting
(Figure 4).
g244764
3. Hold-down bracket
4. Flange locknuts
(Figure
Moving the Spray Tank
1. Loosen the 4 flange locknuts and 4 bolts that
secure the tank-strap halves
1. Flange locknut
2. Tank-strap half
2. Move the spray tank forward until the straps are
aligns flush with the rearmost shoulder of the
strap relief molded into the tank
6
Figure 5
Figure 6
(Figure 7).
Figure 7
3. Bolt
(Figure
g244765
g244767
g244763
8).