Advertisement
Step 13
You will need
Allen Key (H2)
P7
Loosen the bolts attached to the right side of foot board (P7) and on 1 x side board
A (P9) so they are protruding about 15mm. With assistance, attach side board A (P9)
to the foot board (P7) and to the side support leg (P5) as shown. Use the allen key (H2)
to tighten the bolts so that side board A (P9) is secure. Do not fully tighten the bolts.
Step 14
With assistance, lay down 2 x sets of
wooden slats (P11) and attach the
velcro strips on the side boards
(P9, P10) and centre rails (P1).
fantasticfurniture.com.au
P9
P5
P11
Page 11
Advertisement
