Pytes E-BOX Series User Manual page 19

Pytes E-BOX SERIES LFP Battery User Manual
1. The host Link Port 0 must be kept free;
2. The end slave Link Port 1 must be kept free;
Note: The system may not be able to communicate if not
followed the instruction.
Protectio
Battery
n / Alarm
status
/ Normal
Shut down
Power-on Normal
Normal
Standby
Alarm
Normal
Alarm
Charging
Protection
Normal
Discharge
Alarm
Protection
Note: The blinking descriptions, Blink 1 "0.25on/3.75off" ； Blink 2 "0.5s
on /0.5s off" ；Blink 3"0.5s on /1.5s off".
---End of installation---
Table 5-3 LED indications
RUN ALM
● ● ●
OFF OFF OFF
ON ON ON
Blink 1 OFF OFF
OFF Blink 3 OFF
Light OFF
Light Blink 3
OFF Light OFF
Blink 3 OFF
Blink 3 Blink 3
OFF
OFF Light
Capacity LED
● ● ● ● ●
OFF OFF OFF OFF
ON ON ON ON
OFF OFF OFF OFF
OFF OFF OFF OFF
Base on capacity
OFF OFF OFF OFF
Base on capacity
OFF OFF OFF OFF
Descriptions
OFF All off
All light on one second at
ON
same time.
Indication standby
OFF
OFF Battery low voltage
OFF Stop charging, protect start
OFF Stop discharge, protect start
18