Installation Procedure And Minimum Clearances - Delta Electronics ASDA-A Series User Manual

Chapter 2 Installation and Storage
Pay particular attention to vibration of the units and check if the vibration has impacted the electric devices
in the control panel. Please observe the following precautions when selecting a mounting location. Failure
to observe the following precautions may void the warranty!
Do not mount the servo drive or motor adjacent to heat-radiating elements or in direct sunlight.
Do not mount the servo drive or motor in a location subjected to corrosive gases, liquids, or airborne
dust or metallic particles.
Do not mount the servo drive or motor in a location where temperatures and humidity will exceed
specification.
Do not mount the servo drive or motor in a location where vibration and shock will exceed
specification.
Do not mount the servo drive or motor in a location where it will be subjected to high levels of
electromagnetic radiation.
2-4

Installation Procedure and Minimum Clearances

Installation Procedure
Incorrect installation may result in a drive malfunction or premature failure of the drive and or motor. Please
follow the guidelines in this manual when installing the servo drive and motor.
The AC servo drive should be mounted perpendicular to the wall or in the control panel. In order to ensure
the drive is well ventilated, ensure that the all ventilation holes are not obstructed and sufficient free space
is given to the servo drive. Do not install the drive in a horizontal position or malfunction and damage will
occur.
4th Edition 2005/11/30, HE03
2-2
© DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED
ASDA-A User Manual