Do Signal Force Output Diagnosis Operation - Delta Electronics ASDA-A Series User Manual

Chapter 4 Display and Operation
Figure 4.5
The learning position and Internal memorized position are listed as below:
Learning Position
JOGo1
JOGo2
JOGo3
JOGo4
JOGo5
JOGo6
JOGo7
JOGo8

4-4-4 DO signal Force Output Diagnosis Operation

The digital output signal can be forced to be ON or OFF. Follow the setting method in Figure 4.6 to enter
into DO signal force output diagnosis operation (OP x) mode. Pressing UP or DOWN arrow key can
change "x" value from 1 to 5 and force digital output signals DO1 to DO5 to be ON or OFF. (Please also
refer to Figure 4.6).
4th Edition 2005/11/30, HE03
Internal Memorized Position
P1-15(Position rotation number), P1-16(Position pulse number)
P1-17(Position rotation number), P1-18(Position pulse number)
P1-19(Position rotation number), P1-20(Position pulse number)
P1-21(Position rotation number), P1-22(Position pulse number)
P1-23(Position rotation number), P1-24(Position pulse number)
P1-25(Position rotation number), P1-26(Position pulse number)
P1-27(Position rotation number), P1-28(Position pulse number)
P1-29(Position rotation number), P1-30(Position pulse number)
4-8
SET
or
SET
SET
SHIFT
or
© DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED
ASDA-A User Manual