Channel Set Up (Automatic); To Select A Desired Channel - Hitachi VT-MX4510A Owner's Manual

CHANNEL SET UP (Automatic)

Plug in the VCR power cord
Plug the VCR power cord into a standard AC outlet. The "- - : - -" indicator flashes on the display.
Remember: If your cable box or satellite box is connected as in Fig 4 on page 11 or Fig 5 on page 12, you
DO NOT have to set up the channels. Just select the TV and VCR to channel 3 or 4 and also have the
CH3/CH4 switch on the back of the VCR to match the channel you selected (CH 3 or CH 4). Now select
the Box to the channel you wish to view or record.
2 Select channel 3 or 4 on the TV
Turn on the TV and set the TV to channel 3 or 4. Now set the CH3/CH4 switch on the back of the VCR to
match the channel selected on the TV.
3 Turn on the VCR
Press the POWER button to turn on the VCR. Both the "PWR." indicator and the "VCR" indicator on the
display come on.
• Use the remote control for this procedure.
4 Select 'ENGLISH" or "ESPANOL"
Select "ENGLISH" or "ESPANOL"=Spanish by using the PLAY/
F.FWD/ button.
NOTE: This function effects only the language on the screen menu and not the audio source.
5 Begin Channel preset
Press the F.FWD/ button once. The tuner scans and memorizes all active channels in your area.
• The VCR distinguishes between standard TV channels and cable channels.
6 After scanning
The tuner stops on the lowest memorized channel. The TV screen returns to TV mode.
• If "AUTO SET UP'. appears on the TV screen again, check the cable connections. Press the F.FWD/
button once again and the VCR will begin preset again.

TO SELECT A DESIRED CHANNEL

You can select the desired channel by using the CHANNEL(CH)
number buttons on the remote control.
Note for using the number buttons:
• When selecting cable channels which are higher than 99, press the + 100 button first, then press the last
two digits. (Example: to select channel 125, first press the +100 button then press "2" and "5").
• You must precede single-digit channel numbers with a zero (For example: 02, 03, 04 and so on).
LANGUAGE SELECT
ENGLISH [ON]
ESPANOL
AUTO SET UP
16
or STOP/
CH 01
CH 01
or button or directly pressing the
button. Then, press the