Quick-Find; To Skip To The Beginning Of Next Program; To View At Normal Speed; Time Search - Hitachi VT-MX4510A Owner's Manual

• A video cassette must be inserted in the VCR for this function to work
• The number of Index Searches can be set up to 20.
• This function will not operate in the recording mode.
• When you want to cancel the Index Search while in progress, press the STOP button.

QUICK-FIND

This function enables you to search and confirm the contents of the recorded program(s) using the index
mark.
The VCR begins fast forwarding by selecting this function. When the VCR find the beginning of the
program (=the index mark), the VCR begins playback video tape at high speed for 30 seconds. Then, return
to fast forwarding again to the beginning of next program. The VCR repeats these operation to the tape end.
Concerning the index mark, please see "INDEX SEARCH" section.
• Tape must be fully rewound.
1 Select "QUICK-FIND"mode
Press the QUICK-FIND button on the remote control.
QUICK-FIND

TO SKIP TO THE BEGINNING OF NEXT PROGRAM

Press the QUICK-FIND button on the remote control.

TO VIEW AT NORMAL SPEED

Press the PLAY button. The Quick-Find is cancelled.
• A video cassette must be insert in the VCR for this function to work.
• This function will not operate in the recording mode.
• When you want to cancel the Quick-Find while in progress, press the STOP button.
• When the end of a tape is reached during the Quick-Find, the tape will automatically rewind to the
beginning. After rewinding finishes, the VCR will eject the tape and turn itself to off.

TIME SEARCH

The Time Search function makes it possible to quickly advance the tape to your desired position simply by
entering the exact amount of playback time you want to skip.
Example: To watch a program after 2 hours and 50 minutes from the present position, in either direction.
1 Select "TIME SEARCH"
Press the TIME SEARCH button on the remote control..
2 Enter your desired time
Press the PLAY/ or STOP/
minutes)
• The Time Search mode will be cancelled if the procedures are not activated in 30 seconds.
TIME SEARCH
3 Begin Time Search
By pressing the REW or F.FWD button, the VCR will rewind or fast forward to the specified point.
The time counts down as the searching progresses.
4 After Time Search
Playback starts automatically when 0:00 is reached.
• A video cassette must be inserted in the VCR for this function to work.
• Time Search can be set up to a maximum of 9 hours 59 minutes (9:59).
• This function will not operate in the recording mode.
• When you want to cancel the Time Search while in progress, press the STOP button.
button until your desired time appears. ( "2:50" stands for 2 hours 50
2:50
28