Automatic Tv Channel Search (Autoinstall); Monitor Function; Sorting And Clearing Tv Channels Manually - Hitachi VTMX110EUK Operating Instructions Manual

Automatic TV channel search
(Autoinstall)
During installation, all available TV channels are searched for
and saved. If the channel assignments of your cable or
satellite TV provider change or if you are reinstalling the video
recorder, e.g. after moving house, you can start this procedure
again. This will replace the TV channels already saved with the
new ones.
What does Easy Link do?
With Easylink, TV channels can only be searched for and
saved on the TV set. These settings are accepted by the
video recorder. Therefore, this function starts the transfer of
TV channels from the TV set.
1 Switch on the TV set. If required, select the programme
number for the video recorder.
2 Press the
button on the remote control. The main
MENU
menu will appear.
3 Select line 'AUTO INSTALL' using
4 Press
.
OK
AUTO INSTALL
SEARCHING
00 TV CHANNELS FOUND
ƒƒƒƒƒƒƒ__________________
PLEASE WAIT...
5 'Autoinstall' starts. Wait until all TV channels have been
found. This can take several minutes.
6 When Autoinstall is complete, 'STORED' will briefly appear
on the TV screen.
Date and time have been set and saved.
7 To end, press
.
MENU
You can read about how to search for a TV channel manually
in the section 'Manual TV channel search'.

Monitor function

You can switch back and forth between the TV picture and
video recorder picture with
when you use a scart cable to connect the video recorder to
your TV set and your TV set responds to this switch-over.
You can also use on the video recorder.
VCR/TV
10
P- = or ;P+ .
. But this only works
VTR/TV
Sorting and clearing TV channels
manually
After you have performed the automatic channel search you
may not agree with the sequence in which the individual TV
channels have been allocated to the programme positions
(programme numbers) of the video recorder. You can use this
function to individually sort the TV channels already saved or
to delete unwanted TV channels or those with poor reception.
The Teletext clock resets automatically
If you save a TV channel which transmits TXT/PDC on
programme number 'P01', date and time will automatically
be transmitted and constantly updated. As a result, time
changes, i.e. daylight savings time, will be set automatically.
What does Easy Link do?
With Easylink, TV channels can only be searched for and
saved on the TV set. They will then be transferred to the
video recorder.
This function will start the automatic information transfer.
1 Switch on the TV set. If required, select the programme
number for the video recorder.
2 Press
on the remote control. The main menu will
MENU
appear.
3 Select line 'TV CHANNEL ALLOC.' using
;P+
.
4 Confirm with
.
OK
TV CHANNEL ALLOC.
ALLOCATE ON
TV CHANNEL
________________________________
ALLOCATEpOK
5 Using
Q or P , select the saved TV channel that
you want to assign to the programme number 'P01'.
6 Confirm with
. The following message will briefly
OK
appear on the TV screen: 'ALLOCATED ON P01'.
7 Then the sorting for the next highest programme number
will appear on the screen, e.g. 'ALLOCATE ON P02'.
8 Using
Q or P , select the saved TV channel that
you want to assign to this programme number, e.g. 'P02'.
Deleting TV channels
Using you can delete unwanted TV channels
CLEAR (CL)
or those with poor reception.
9 Confirm with
. The following message will briefly
OK
appear on the TV screen: 'STORED'.
P- = or
P01
è BBC1 p
EXITpMENU