Slow Motion - Hitachi VT-MX4510A Owner's Manual

(black and white streaks) may appear on the playback picture. If this occurs, you can adjust the tracking
control manually by pressing CHANNEL or button on the VCR until the streaks disappear.
To return to the DTR function, stop the tape once and start playback again.
• You can reduce the noise lines by pressing the CHANNEL(CH) or button in slow mode, too.
Slow tracking adjustment will not be set automatically.
NOTE: In Still mode, press the SLOW button and press the CHANNEL(CH) or button until the
streaks disappear. To return to Still mode, press the PAUSE button on the remote control again.

SLOW MOTION

Press the SLOW button on the remote control to reduce the playback speed. The VCR mutes the sound
during slow motion. You can control the speed by pressing the F.FWD button (faster) or the REW button
(slower).
Press the PLAY button to return to normal playback.
NOTE: If it is left in the Slow mode for more than five minutes, the VCR will automatically switch to the
Stop mode.
24