Operating Controls And Functions - Hitachi VT-MX4510A Owner's Manual

OPERATING CONTROLS AND FUNCTIONS

NOTE:
• We do not recommend the use of universal remote controls. Not all of the functions may be controlled with a
universal remote control.
If you decide to use a universal remote control with this unit, please be aware that the code number given may not
operate this unit. In this case, please call the manufacturer of the universal remote control.
-VCR FRONT PANEL
-REMOTE CONTROL
1. Cassette Compartment
2. REW button- Press to rewind the tape, or to view the picture rapidly in reverse during the playback mode. (Rewind
Search)
button- Press to cancel a setting of timer program. Press to correct digits when setting program (For example:
setting clock or timer program). Press to add or delete channel numbers during channel preset. (only on the remote
control)
3. STOP button- Press to stop the tape motion.
EJECT button- Press to remove a tape from the VCR. (only on the VCR)
button- Press to enter digits when setting program (for example: setting clock or timer program). Press to select
setting modes from the on screen menu. (only on the remote control)
4. PLAY button- Press to begin playback.
button- Press to enter digits when setting program (for example: setting clock or timer program). Press to select
setting modes from the on screen menu. (only on the remote control)
5. F.FWD button- Press to rapidly advance the tape, or view the picture rapidly in forward during playback. (Forward
Search)
button- When setting program (for example: setting clock or timer program), press to determine your selection and
proceed to the next step you want to input. Press to determine the setting modes from the on screen menu. Press to add
or delete channel numbers during channel preset. (only on the remote control)
6. Power button- Press to turn VCR on and off. Press to activate timer recording.
7. Remote sensor window- Receives the infrared signals from the remote control.
8. Digital display-See page 28.
9. CHANNEL(CH) / buttons-Press to select the desired channels for viewing or recording.
Tracking function-Press to minimize video 'noise' (lines or dots on screen) during playback (only on the VCR) or slow
mode.
Press to stabilize the picture in the Still mode when the picture begins to vibrate vertically.
10. REC button- Press for manual recording.
IRT button- Press to activates Instant Recording Timer. (only on the VCR)
1 to 9, first
11. NUMBER buttons- Press to select desired channels for viewing or recording. To select channels from
press "0" button then 1 to 9. (only on the remote control)
9