Hose And Cable Lengths; Levelling The Washing Machine; Water Supply Hose - Logik L914WM17E Installation Instructions Manual

INSTALLATION
GB

Hose and Cable Lengths

How to connect from the left side

Levelling the Washing Machine

There are levelling feet on the underside. They must be adjusted to make sure the washing
machine is level.
1. On each foot, loosen the lock ring by
turning it clockwise.
2. Adjust all feet by rotating each upwards
or downwards.
3. Use a spirit level to ensure the washing
machine is level.
4. Tighten each lock ring by turning them
anti-clockwise (towards the washing
machine body).
Ensure all lock rings are tightened securely. Check that the feet are still bolted to the washing
machine - if they're unbolted, the washing machine will move around.

Water Supply Hose

Points to remember
• Follow the instructions in this section to avoid water leaks.
• Don't connect the hose to a combination tap.
• Don't twist, squash, modify or cut the hose.
This machine is designed to connect to the cold water supply. Do not connect to the hot
•
water supply.
• Use only the new water supply hose supplied. Old hose sets should not be reused.
24
~80cm
~90cm
How to connect from the right side
~130cm
~40cm
110 -135cm