Questions And Answers - Logik L914WM17E Installation Instructions Manual

Questions and Answers

GB
Issues
Washing
machine cannot
start up
Door cannot be
opened
Heating fault
Water leakage
Water is
overflowed
from the
bottom of the
machine
Indicator or
display does
not light
Detergent
residues in the
box
Washing effects
are not good
Abnormal noise
Great vibration
40
Reasons
• Machine's safety
protection design
working.
• NTC is damaged and
heating pipe is aging.
• The connection between
inlet pipe or outlet hose
and tap or washing
machine is not tight.
• Drain pipe in the room is
blocked.
• The inlet pipe is not
connected firmly.
• Outlet hose has water
leakage.
• Power is disconnected.
• PC board has problems.
• Harness has connection
problem.
• Washing powder
is dampened and
agglomerated.
• The clothes are too dirty.
• Insufficient detergent
quantity.
Solutions
• Check if the door is closed tightly.
• Check if power plug is inserted properly.
• Check if water supply tap is opened.
Check if button Start/Pause is pressed.
•
Check if button On/Off is pressed.
•
• Disconnect the power.
• Cold wash only.
• Contact the service center promptly.
• Check and fasten water pipes.
• Clean up outlet hose and ask a
specialized person to repair it when
necessary.
• Fix the inlet pipe.
• Replace the drain hose.
• Check if the power is shut down and
power plug is connected correctly.
• If not, please call the service line.
• Clean and wipe the box.
• Use detergents suitable for the fabric.
• Select a proper procedure.
• Add the proper detergent quantity
according to the instructions in detergent
package.
• Check if the fixing (bolts) has been
removed.
• If cabinet is installed on solid and level
floor.
• Check if there are any buckles or metal
articles inside.
• Check if the feet in the washing machine
are adjusted level.