Moving The Washing Machine From One Location To Another; Hose And Cable Lengths; Levelling The Washing Machine - Logik L612WSM16E Instruction Manual

INSTALLATION
GB

Moving the Washing Machine from One Location to Another

Before you move the washing machine:
• Shut off the tap and run the washing machine to drain the water. Drain any remaining
water from the pump hose.
• Disconnect the mains cable.
• Attach the transit bolts.
Make sure to fix the transit bolts prior to moving the washing machine.

Hose and Cable Lengths

How to connect from the left side

Levelling the Washing Machine

There are 4 levelling feet on the underside. They MUST be adjusted to make sure the
washing machine is level.
1
On each foot,
loosen the lock
ring by turning
clockwise.
Ensure all four lock rings are tightened securely. Check the feet are still
bolted to the washing machine - if they're unbolted, the washing machine
will move around.
24
L612WSM16E_IB.indb 24
~95cm
Favourite
~145cm
~70cm
2
Adjust all four
feet by rotating
each upwards or
downwards.
How to connect from the right side
~140cm
L714WM15E
~95cm
Press 3 sec.
for Signal / Favourite
On/Off
~120cm
3 4
STOP
RAPID 15' COTTON 95°
BABY DAILY 60' COTTON 60° 400 Door Child Wash Rinse Spin
WASH 50° COTTON 40° Lock Lock
BLOUSES/ SHIRTS 60° SYNTHETIC 60°
MIX 30° SILK 30° 1200 600
SPORTS WEAR 30° HAND WASH 30° WOOL 40° RINSE IRONING EASY TIMER DELAY SELECT TEMPERATURE PAUSE START
SPIN 1000 800
Use a spirit level Tighten each lock ring
to ensure the by turning them anti-
washing machine clockwise (towards the
is level. washing machine body).
21/03/2016 16:04