Leica Q2 Instruction Manual page 212

The most recent image is not displayed on the
LCD panel
Parts of my video scenes are not fully in the
picture
Picture quality
The picture is too bright
Image noise
Unnatural colors
Round white stains, similar to soap bubbles
Images are out of focus
Images are overexposed
Out of focus/picture stabilizer not functioning
The image is grainy or there is image noise
Horizontal stripes
Unnatural colors and brightness
No images are displayed
Images cannot be displayed
212
FAQ
Preview is deactivated
Difference of aspect ratios between camera and playback
medium
Light sensor was covered while picture was taken
Long exposure times (> 1 s)
ISO sensitivity set too high
White balance not or incorrectly set
Taking flash photography shots in a very dark environment:
reflections of dust particles
Lens is dirty
Lens is obstructed
Camera moved during shooting
Macro Function
Flash is activated in bright surroundings
Strong light source in the image
(Half) backlight falling into the lens (also from light sources
outside the image range)
Selected exposure time is too long
Shooting at a dark location without flash
ISO sensitivity set too high
Picture was taken with electronic shutter under a light
source like a fluorescent lamp
Picture taken in artificial light or extreme brightness
No memory card inserted
The images were taken with another camera
File name of the image was changed on a PC
Activate
Auto Review
Set the correct aspect ratio on the camera
Make sure that the light sensor is not obstructed
Activate the noise suppression function for long exposure
times
Decrease ISO sensitivity
Adjust white balance to light source or adjust manually
Deactivate the flash
Clean the lens
Make sure that lens is unobstructed
Use flash
Mount the camera on a tripod
Use faster shutter speeds
Select the appropriate mode
Change the flash mode
Avoid strong light sources in the image
Use the lens hood or change to another object
Select a shorter exposure time
Use a tripod
Decrease ISO sensitivity
Try shorter shutter speeds
Set white balance or select correct lighting presets
Insert a memory card
Transfer the shots to another device to view them
Use appropriate software for image transfers from a PC to
the camera