Automatic Setting - Leica Q2 Instruction Manual

AUTOMATIC SETTING

The camera automatically adjusts the sensitivity to ambient bright-
ness and/or to the configured shutter-speed/aperture combination.
In conjunction with aperture priority mode, this function extends the
range for automatic exposure control.
▸ Select in the main menu
ISO
▸ Select
Auto ISO
170
RECORDING VIDEO ▸ ISO SENSITIVITY
LIMITING SETTING RANGES
A max. ISO value can be set, which will then limit the automatic set-
ting range ( ). A max. exposure time can also optionally
Maximum ISO
be configured. There are focal length related settings (
, ) and fixed max. shutter speeds
1/(3f) 1/(4f)
available for that purpose.
In the focal length-specific settings, the camera will only switch to a
higher sensitivity if the shutter speed would fall below the set thresh-
old due to low light.
LIMITING ISO VALUES
All values from ISO 200 are available.
Factory setting:
6400
▸ Select in the main menu
Auto ISO Settings
▸ Select
Maximum ISO
▸ Select the desired value
LIMITING SHUTTER SPEED RANGES
Factory setting:
1/(2f)
▸ Select in the main menu
Auto ISO Settings
▸ Select
Min. Shutter Speed
▸ Select the desired value
( , , , ,
1/f 1/(2f) 1/(3f) 1/(4f) 1/2000
, , , , ,
1/60 1/30 1/15 1/8 1/4
Note
• When Auto ISO is active, the camera uses the dynamic adjustment
function for the ISO value for the exposure setting. Depending on
the exposure mode selected, the automatic ISO setting interacts
with automatically controlled aperture and/or shutter speed set-
tings.
,
1/f 1/(2f)
s and
1/2 1/2000
, , , ,
1/1000 1/500 1/250
)
1/2
,
s
,
1/125