Leica Q2 Instruction Manual page 124

FLASH PHOTOGRAPHY
▸ Switch on the flash unit
▸ Set the desired guide number control mode (e.g. TTL or GNC =
Guide Number Control) on the flash unit
▸ Switch the camera on
▸ Set the desired exposure mode, shutter speed and/or aperture
setting
• It is imperative to take note of the shortest flash sync speed, as
it determines whether a "normal" flash or an HSS flash is fired.
▸ Tap the shutter button before each flash exposure to activate
exposure metering
• The flash unit may not fire if this step is missed by pressing the
shutter button down completely and skipping these settings.
Note
• It is recommended to use a different exposure metering method
than in flash photography.
Spot
124
PHOTOGRAPHY ▸ FLASH PHOTOGRAPHY