Initiate/Exit Playback Mode - Leica Q2 Instruction Manual

CONTROL ELEMENTS ON THE LCD PANEL
On-screen control elements generally function by intuitively by
touch. Many can also be selected by pressing one of the three
buttons to the left of the LCD panel. A control element in the header
is accompanied by an icon denoting the relevant button. A control
element on the edge of the screen will be positioned directly next to
the relevant button.
Example: The "Go back" icon
– tap on the "Go Back" icon directly
– press the relevant button
(top button = button)
PLAY
C B A C
A Control element "Go back"
B Control element "Delete"
C Display of the relevant button
can be selected in one of two ways:
A

INITIATE/EXIT PLAYBACK MODE

Using touch control
▸ Swipe up or down
Shooting
F 2.8 1/8000 ISO 12500 EV
12MP
-3 2 1 0 1 2 3+
Using button control
B
▸ Press the button
PLAY
• The last shot taken appears on the screen.
• The following message appears if the inserted memory card
does not contain any (image) files:
• The button function differs, depending on the current
PLAY
camera setting:
Initial situation
Full screen display of a recording Recording mode
Display of multiple small record-
ings
PLAYBACK MODE ▸ INITIATE/EXIT PLAYBACK MODE
Playback
A
INFO
8234
No valid picture to play
After pressing the
PLAY
Full screen display of the
recording
.
button
183