Usb Driver (Cr750-D/Crnd-700 Series Robot Controller) Installation - Mitsubishi Electric MELFA CR750 Series User Manual

1.5.3. USB driver (CR750-D/CRnD-700 series robot controller) installation

Connecting the CR750-D/CRnD-700 series robot controller with USB requires installation of the robot USB
driver. Install with the following procedure.
1.5.3.1. When Using Windows XP
Below is the installation procedure for the USB driver using Windows XP (Professional).
1.5.3.2. When using Windows Vista
When you connect the CR750-D/CRnD-700 robot controller and the computer with a USB cable, installation
starts and completes automatically.
1.5.3.3. When using Windows 7 / 8 / 8.1 / 10
When you connect the CR750-D/CRnD-700 robot controller and the computer with a USB cable, installation
starts and completes automatically.
Caution
If you connect the computer and CR750/CR751 series robot controller with a USB cable, the
communication may become unstable by noise.
In this case, we recommend changing LAN communication.
1-32
↓
↓
(Completed)
1) When you connect the computer and
CR750-D/CRnD-700 series robot
controller with a USB cable, the
screen on the left is displayed. Select
"Install the software automatically
(Recommended)", then click the [Next]
button. Installation of the USB driver
starts.
2) When the screen on the left is
displayed, the installation is complete.
Click the [Finish] button to end the
installation.
1-32