Table of Contents
Advertisement
TROUBLESHOOTING GUIDE
OVER-RANGE
If the message OVER-RANGE is displayed when scanning a sample, the
sample should be diluted and tested again (see Sample Dilution
Techniques and Volumetric Measurements on page 14).
POWER
If meter will not come on, disconnect the battery by setting the Battery
Disconnect Button to the "out" position and try to operate the
colorimeter on AC power (see Battery Care page 45).
STRAY LIGHT
If the message STRAY LIGHT!! is displayed when scanning a sample,
cover the colorimeter chamber and repeat the scan (see Stray Light
Interference page 15.
48
SMART COLORIMETER
Advertisement
Table of Contents
