Product Ids - Cisco NCS 1001 Manual

Cisco NCS 1001 Overview
Figure 6: PSM Front View
1
2
3
4
The following table describes the mapping of controllers and optical ports for the protection switching module.
Controller
Ots 0/slot/0/0
Ots 0/slot/0/1
Ots 0/slot/0/2

Product IDs

The following table describes the product IDs of the components.
Product ID
NCS1001-K9=
NCS1K-CNTLR2=
NCS1K-EDFA=
NCS1K-PSM=
◦ Balances the two line losses by changing the VOA attenuation value at the same time of the switch
change of state.
Protected path input and output port [P - RX, TX]
Working path input and output port [W - RX, TX]
COM input and output port [COM - RX, TX]
Status LED
Description
Network Convergence System 1001 line system 3 slots
Network Convergence System 1001 Control card
Network Convergence System 1001 amplifier module
Network Convergence System 1001 protection module
Optical Ports
COM-TX
Working path input and output port [W - RX, TX]
Protected path input and output port [P - RX, TX]
Hardware Installation Guide for Cisco NCS 1001
Product IDs
7