Cisco CRS-1 Site Planning Manual page 64

Carrier routing system 8-slot line card chassis
Hide thumbs Also See for CRS-1:
Table of Contents

Advertisement

Optional MSC, FP, PLIM, SIP, and SPA Product IDs
Table B-3
Component
1xOC-768 PLIM
4xOC-192 PLIM
16xOC-48 PLIM
8x10-GE XENPAK
PLIM
8x10-GE and
4x10-GE XFP
PLIMs
20x10-GE and
14x10-GE XFP
PLIMs
1x100-GE CFP
PLIM
PLIM impedance
carrier
Table B-4
Component
Cisco CRS SPA
Interface Processor-800
1-Port OC-192c/ STM-
64 POS/RPR XFP SPA
Book TCisco CRS Carrier Routing System 8-Slot Line Card Chassis Site Planning Guideitle
B-4
PLIM Component Product IDs
Product ID
1OC768-POS-SR(=)
4OC192-POS/DPT-LR(=)
4OC192-POS/DPT-IR(=)
4OC192-POS/DPT-SR(=)
4OC192-POS/DPT-VS(=)
16OC48-POS/DPT(=)
POM-OC48-LR2-LC-C(=)
POM-OC48-SR-LC-C(=)
8-10GBE(=)
CRS-XENPAK10GB-LR(=)
8-10GBE-WL-XFP(=)
4-10GBE-WL-XFP(=)
20X10GBE-WL-XFP
14X10GBE-WL-XFP
1X100GBE(=)
CRS-INT-IMPEDANCE(=)
SIP and SPA Component Product IDs
Product ID
CRS1-SIP-800
SPA-OC192POS-XFP
Appendix B
Product IDs for the Cisco CRS 8-Slot Line Card Chassis
Description
1-port OC-768c/STM-256c PLIM, with
short-reach optics (POS)
4-port OC-192c/STM-64c PLIM, with
long-reach optics (POS or DPT)
4-port OC-192c/STM-64c PLIM, with
intermediate-reach optics (POS or DPT)
4-port OC-192c/STM-64c PLIM, with
short-reach optics (POS or DPT)
4-port OC-192c/STM-64c PLIM, with
very-short-reach optics (POS or DPT)
OC-48c/STM-16c PLIM, uses small form-factor
pluggable (SFP) modules (POS or DPT)
The PLIM uses 1 to 16 single-mode, long- and
short-reach optic modules (mixing allowed):
Long-reach optics (POM-OC48-LR2-LC-C=)
Short-reach optics (POM-OC48-SR-LC-C=)
10-GE PLIM, uses XENPAK optic modules.
The PLIM uses 1 to 8 single-mode, long-reach
optic modules:
Long-reach optics (CRS-XENPAK10GB-LR=)
10-GE PLIM, uses XFP optic modules.
These PLIMs use 1 to 8 (or 1 to 4) single-mode,
XFP optic modules.
10-GE PLIM, uses XFP optic modules.
These PLIMs use 1 to 20 (or 1 to 14) single-mode,
XFP optic modules.
100-GE PLIM, uses one CFP optic module.
Blank card carrier for each empty PLIM slot
(required for EMI compliance and cooling)
Description
Occupies one PLIM slot on the Cisco CRS
16- and 8-Slot LCC. Supports six
normal-height SPAs or three double-height
SPAs or any combination in between.
OL-5802-09

Advertisement

Table of Contents
loading

Table of Contents