Advertisement
Quick Links
Advertisement
Related Manuals for J-Tech Digital JTD-416
Summary of Contents for J-Tech Digital JTD-416
- Page 1 VGA KVM Extender over Ethernet JTD-416 | JTECH-KVE3...
-
Page 2: Package Contents
Built-in manual brightness and contrast settings for fine-tuning image quality Built-in ESD electrostatic protection circuit Simple and convenient “plug & play” installation Package Contents • J-Tech Digital JTECH-KVE3 (Transmitter + Receiver) • 2 x Power Adapter DC5V 1A • 4 x Mounting Brackets & Screws... -
Page 3: Ports And Interfaces
Ports and Interfaces Transmitter Receiver ① DC 5V: DC 5V Power Adapter In ② PC IN: Connect to PC Host in via USB-A to USB-B Cable ③ VGA IN: Connect to Input Source Device via VGA Male Cable ④ CAT5e/6: Connect to CAT5e/6 cable between transmitter and receiver ⑤... -
Page 4: Connection Diagram
Connection Diagram Specifications Input Ports VGA x 1 (DB15 Female) | USB-A x 2 Output Ports VGA x 2 (DB15 Female) | USB-B x 1 Extension Distance 985 Feet (VGA & USB) USB Transmission rate 480 Mbps USB Standard USB 2.0 Vertical Frequency Range 60 / 75 / 85Hz 640 x 480 | 800 x 600 | 1024 x 768 | 1280 x 720 | 1280 x... -
Page 5: Troubleshooting
Troubleshooting Problem Cause Solution Please check if the power adapter is connected properly A power adapter is not Power LED is off and product and securely on both properly connected or VGA is not working transmitter and receiver. source device is not on Ensure the VGA source device is powered on Please use standardized VGA... -
Page 6: Extended Warranty
Extended Warranty With the registration of supported J-Tech Digital products, you extend the current warranty by 6 months. This extension is added to the warranty that starts at the purchase date of the device supported. Total product warranty with the extended period will equate to a total of 18 months of warranty from the date of purchase.