Page 1
All manuals and user guides at all-guides.com F8F Rare Bear Install Manual...
Page 2
All manuals and user guides at all-guides.com 1.Assemble the base 2.Cut the V-groove at the hinge of the rudder surface to make the rudder surface active.
Page 3
All manuals and user guides at all-guides.com 3.Bonding the body (note that the left and right side panels of the fuselage are different) 4、Bonded finish fuselage...
Page 4
All manuals and user guides at all-guides.com 6、Insert the horizontal tail, pay attention to the left and right sides of the symmetry...
Page 5
All manuals and user guides at all-guides.com 8、Decals...
Page 6
All manuals and user guides at all-guides.com 10、Sticking the wing (the line is facing down), pay attention to both sides...
Page 7
All manuals and user guides at all-guides.com...
Page 8
All manuals and user guides at all-guides.com 12、...
Page 9
All manuals and user guides at all-guides.com 13、 14、...
Page 10
All manuals and user guides at all-guides.com 15、The receiver is attached to the left side of the fuselage using a Velcro, and fixed the cable with a tie.
Page 11
All manuals and user guides at all-guides.com 16、The battery is fixed to the right side of the fuselage using a Velcro...
·The center of gravity of the machine is 15mm from the front edge of the wing. Please move the battery back and forth to adjust the center of gravity. ·The rudder amount are 5mm for each side of the movement. Please adjust the rudder surface to the level before the test flight. MinimumRC...
Need help?
Do you have a question about the F8F Rare Bear and is the answer not in the manual?
Questions and answers