Hitachi CP-DW10N Operating Manual
  1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Projector
  5. CP-DW10N
  6. Operating manual
Hitachi CP-DW10N Operating Manual

Hitachi CP-DW10N Operating Manual

Hitachi cp-dw10n: user guide
Hide thumbs Also See for CP-DW10N:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operating Manual
Projector
CP-DW10N
User's Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
WARNING
►Before using this product, please read all manuals for this
product. Be sure to read "Safety Guide" first. After reading them, store them in a
safe place for future reference.

About this manual

Various symbols are used in this manual. The meanings of these symbols are
described below.
WARNING
CAUTION
NOTICE
• The information in this manual is subject to change without notice.
NOTE
• The manufacturer assumes no responsibility for any errors that may
appear in this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
Trademark acknowledgment
®
• Mac
is a registered trademark of Apple Inc.
®
• Windows
is a registered trademark of Microsoft Corporation in the U.S. and/or
other countries.
• VESA and DDC are trademarks of the Video Electronics Standard Association.
• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.
• DVI is a trademark of Digital Display Working Group.
• Trademark PJLink is a trademark applied for trademark rights in Japan, the
United States of America and other countries and areas.
• "Blu-ray Disc" is a trademark.
All other trademarks are the properties of their respective owners.
This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.
This entry notices of fear of causing trouble.
Please refer to the pages written following this symbol.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CP-DW10N and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Hitachi CP-DW10N

Summary of Contents for Hitachi CP-DW10N

  • Page 1: About This Manual

    Projector CP-DW10N User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING ►Before using this product, please read all manuals for this product. Be sure to read “Safety Guide” first. After reading them, store them in a safe place for future reference.

  • Page 2: Table Of Contents

    Part names ....5 Projector ..... . 5 Control panel .

  • Page 3: Projector Features

    (5) User’s manuals (Book x1, CD x1) (6) Security label NOTE • Keep the original packing materials, for future reshipment. Be sure to use the original packing materials when moving the projector. Use special caution for the lens. Projector features / Preparations standard. , see "Technical".

  • Page 4: Fastening The Lens Cover

    Otherwise, the lens cover may block the light from the projector or hit the lens, which may cause damage to it. When mounting the projector upside down, hang the lens cover on the side of the projector or place it on the projector.

  • Page 5: Part Names

    Clean the air filter periodically. ►Do not use the security bar and slot to prevent the projector from falling down, since it is not designed for it. (15)

  • Page 6: Control Panel

    (6) Shutdown switch ( (7) CONTROL port (12) HDMI CAUTION ►Use the shutdown switch only when the projector is not turned off by normal procedure, since pushing this switch stops operation of the projector without cooling it down. STANDBY/ON 14, 17, 73)

  • Page 7: Remote Control

    (25) RESET button ( (26) Battery cover ( NOTE • Any button marked with “ 16, 23) 19, 49) 16, 18) 22, 26) ” is not supported on this projector ( Part names MY SOURCE/ COMPUTER VIDEO DOC.CAMERA ASPECT AUTO...

  • Page 8: Setting Up

    , c2 Screen height On a horizontal surface • Keep a space of 30 cm or more between the sides of the projector and other objects such as walls. • For the case of installation in a special state such as ceiling mount, the specified mounting accessories (...
  • Page 9 • Do not place or attach anything that would block the lens or vent holes. • Keep a space of 30 cm or more between the sides of the projector and other objects such as walls.

  • Page 10: Connecting Your Devices

    Setting up Connecting your devices Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustrations to connect them.
  • Page 11 NOTE • The COMPUTER IN1/2 port can support a component signal also. The specifi c adapter or the specifi c cable is required for a component video input to the projector. External device...
  • Page 12 And be sure to tighten the screws on connectors with screws. • When connecting a laptop PC to the projector, be sure to activate the PC’s external RGB output. (Set the laptop PC to CRT display or to simultaneous LCD and CRT display.) For details on how this is done, please refer to the...
  • Page 13 • Take advantage of this feature by connecting a computer cable to the COMPUTER IN1 port (DDC 2B compatible). Plug-and-Play may not work properly if any other type of connection is attempted. • Please use the standard drivers in your PC as this projector is a Plug-and- Play monitor. NOTE for HDMI •...

  • Page 14: Connecting Power Supply

    ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in fire and/or electrical shock. • Only use the power cord that came with the projector. If it is damaged, consult your dealer to get a new one.

  • Page 15: Remote Control

    If it is difficult to send the signal to the sensor directly, attempt to make the signal reflect. • The remote control uses infrared light to send signals to the projector (Class 1 LED), so be sure to use the remote control in an area free from obstacles that could block the remote control’s signal to the projector.

  • Page 16: Changing The Frequency Of Remote Control Signal

    (2) Set to Mode 2:HIGH... the MAGNIFY OFF and the ESC buttons Please remember that the REMOTE FREQ. in the SERVICE item of the OPTION menu ( controlled should be set to the same mode as the remote control. 51) of the projector to be MY SOURCE/ VIDEO COMPUTER DOC.CAMERA...

  • Page 17: Power On/Off

    Attach the lens cover, after the POWER indicator turns in steady orange. Do not turn the projector on for about 10 minutes or more after turning it off. Turning the projector on again too soon could shorten the lifetime of some consumable parts of the projector.

  • Page 18: Operating

    Please see the AUDIO SOURCE item of the AUDIO menu ( ● When the projector is in the standby state, the volume can be adjusted if is not selected for the AUDIO OUT STANDBY and the NORMAL...
  • Page 19 Press the COMPUTER button on the remote control. Each time you press the button, the projector switches its input port from the current port as below. COMPUTER IN1 ● While the ON is selected for the AUTO SEARCH item in...

  • Page 20: Searching An Input Signal

    VIDEO S-VIDEO ● While the ON is selected for the AUTO SEARCH item in the OPTION menu 47), the projector will keep checking the ports in above order repeatedly till an input signal is detected. Selecting an aspect ratio Press the ASPECT button on the remote control.

  • Page 21: Adjusting The Projector's Elevator

    Adjusting the projector's elevator When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally. Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the front side of the projector within 3 degrees.

  • Page 22: Using The Automatic Adjustment Feature

    Operating Using the automatic adjustment feature Press the AUTO button on the remote control. Pressing this button performs the following. For a computer signal The vertical position, the horizontal position and the horizontal phase will be automatically adjusted. Make sure that the application window is set to its maximum size prior to attempting to use this feature.

  • Page 23: Correcting The Keystone Distortions

    ● The adjustable range of this function varies for each input signal. For some input, this function may not work well. ● When the projector is inclined to near ±6 degrees or over, this function may not work well. ● This function will be unavailable when the Transition Detector is activated ( ●...

  • Page 24: Temporarily Freezing The Screen

    ● The projector automatically exits from the FREEZE mode when some control buttons are pressed. ● If the projector continues projecting a still image for a long time, the LCD panel might possibly be burned in. Do not leave the projector in the FREEZE mode for too long.

  • Page 25: Using The Menu Function

    ADVANCED MENU. Each of these menus is operated using the same methods. While the projector is displaying any menu, the MENU button on the projector works as the cursor buttons. The basic operations of these menus are as follows.
  • Page 26 Operating To close the MENU, press the MENU button again or select the EXIT and press the ◄ cursor (or the ENTER) button. Even if you do not do anything, the dialog will automatically disappear after about 30 seconds. ● If you want to move the menu position, use the cursor buttons after pressing the POSITION button.

  • Page 27: Easy Menu

    EASY MENU From the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons. Then perform it according to the following table. Item Using the ◄/► cursor buttons switches the mode for aspect ratio. See the ASPECT item in the IMAGE menu ( •...

  • Page 28: Eco Mode , Mirror , R

    EASY MENU Item Using the ◄/► cursor buttons turns off/on the eco mode. ECO MODE See the ECO MODE item in the SETUP menu ( Using the ◄/► cursor buttons switches the mode for mirror status. MIRROR See the MIRROR item in the SETUP menu ( Performing this item resets all of the EASY MENU items except the FILTER TIME and the LANGUAGE.

  • Page 29: Picture Menu

    PICTURE menu From the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor (or the ENTER) button to execute the item. Then perform it according to the following table.
  • Page 30 • When input signal is HDMI, this item can also be selected if either 1) or 2) applies. 1) HDMI FORMAT is set to VIDEO. 2) HDMI FORMAT is set to AUTO, and the projector recognizes that it receives video signals. (continued on next page)
  • Page 31 • When input signal is HDMI, this item can also be selected if either 1) or 2) applies. 1) HDMI FORMAT is set to VIDEO. 2) HDMI FORMAT is set to AUTO, and the projector recognizes that it receives video signals. Using the ◄/► cursor buttons adjusts the sharpness.

  • Page 32: Image Menu

    OVER SCAN or 2) applies. 1) HDMI FORMAT is set to VIDEO. 2) HDMI FORMAT is set to AUTO, and the projector recognizes that it receives video signals. • When this adjustment is too large, certain degradation may appear at the frame area of the picture.
  • Page 33 Item Using the ◄/► cursor buttons adjusts the horizontal position. Right • Over-adjusting the horizontal position may cause noise to appear on the screen. If this occurs, please reset the horizontal position to the default setting. Pressing the RESET button on the remote control when H POSITION the H POSITION is selected will reset the H POSITION to the default setting.

  • Page 34: Input Menu

    INPUT menu INPUT menu From the INPUT menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor (or the ENTER) button to execute the item. Then perform it according to the following table.
  • Page 35 Item The video format for the S-VIDEO port and the VIDEO port can be set. (1) Use the ▲/▼ cursor buttons to select the input port. (2) Using the ◄/► cursor buttons switches the mode for video format. VIDEO FORMAT •...
  • Page 36 INPUT menu Item The computer input signal type for the COMPUTER IN1 and IN2 ports can be set. (1) Use the ▲/▼ cursor buttons to select the COMPUTER IN port to be set. (2) Use the ◄/► cursor buttons to select the computer input signal type.
  • Page 37 Item The resolution for the COMPUTER IN1 and the COMPUTER IN2 input signals can be set on this projector. In the RESOLUTION menu select the resolution you wish to display using the ▲/▼ cursor buttons. ■AUTO Selecting AUTO will set a resolution appropriate to the input signal.

  • Page 38: Setup Menu

    SETUP menu SETUP menu From the SETUP menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor (or the ENTER) buttonn to execute the item. Then perform it according to the following table. Item Using the ◄/►...

  • Page 39: Monitor Out

    Using ▲/▼ cursor buttons switches the standby mode setting between the NORMAL and the SAVING. NORMAL • When the SAVING is selected and the projector is in the standby state, the power consumption is lowered with some functional restriction as below.

  • Page 40: Audio Menu

    AUDIO menu AUDIO menu From the AUDIO menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor (or the ENTER) button to execute the item. Then perform it according to the following table.

  • Page 41: Screen Menu

    SCREEN menu From the SCREEN menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor (or the ENTER) button to execute the item. Then perform it according to the following table.
  • Page 42 SCREEN menu Item This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and the START UP screen. Display the image you want to capture before executing the following procedure.
  • Page 43 Item Using the ▲/▼ cursor buttons turns on/off the MyScreen lock function. MyScreen Lock When the ON is selected, the item MyScreen is locked. Use this function for protecting the current MyScreen. • This function cannot be selected when the ON is selected to the MyScreen PASSWORD item in the SECURITY menu ( Using the ▲/▼...

  • Page 44: Ource Name

    SCREEN menu Item Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ cursor buttons on the SCREEN menu to select the SOURCE NAME and press the ► cursor (or the ENTER) button.
  • Page 45 Item Using the ▲/▼ cursor buttons switches the mode for the template screen. Press the ► cursor (or the ENTER) button to display the selected template, and press the ◄ cursor button to close the displayed screen. The last selected template is displayed when the MY BUTTON allocated to the TEMPLATE function is pressed ( TEST PATTERN MAP2...
  • Page 46 SCREEN menu Item The C.C. is the function that displays a transcript or dialog of the audio portion of a video, files or other presentation or other relevant sounds. It is required to have NTSC format video or 480i@60 format component video source supporting C.C.

  • Page 47: Option Menu

    AUTO SEARCH through input ports in the following order. The search is started from the current port. Then when an input is found, the projector will stop searching and display the image. Using the ▲/▼ cursor buttons turns on/off the DIRECT POWER ON function.
  • Page 48 Long (max. 99 minutes) When the time is set to 0, the projector is not turned off automatically. AUTO When the time is set to 1 to 99, and when the passed time with no-...
  • Page 49 Item This item is to assign one of the following functions to the MY BUTTON 1/2 on the remote control ( (1) Use the ▲/▼ cursor buttons on the MY BUTTON menu to select a MY BUTTON - (1/2) and press the ► cursor (or the ENTER) button to display the MY BUTTON setup dialog.
  • Page 50 • Please be careful with the operating environment of the projector and the condition of the filter unit. (continued on next page)
  • Page 51 • Please use this function to prevent tampering or accidental operation. This function does not have any effect on the remote control. REMOTE FREQ. (1) Use the ▲/▼ button to change the projector's remote sensor frequency setting ( 1:NORMAL (2) Use the ◄/► button to change the projector's remote sensor on or off.
  • Page 52 CONTROL port. NETWORK BRIDGE NETWORK BRIDGE: Select this type, if it is required to control an external device as a network terminal, via this projector from the computer. The CONTROL port doesn't accept RS-232C commands.( Controlling the external device via the projector (using the NETWORK BRIDGE function) of the User’s Manual - Network Guide)
  • Page 53 OFF: Select this mode if it is not required to check the responses from the device that the projector sends data to. In this mode, the projector can send out data from the computer continuously. 1s /2s /3s: Select the time period to keep the projector waiting for response from the device that the projector sends data to.
  • Page 54 OPTION menu Item INFORMATION Selecting this item displays a dialog titled “INPUT_INFORMATION”. It shows the information about the current input. • The “FRAME LOCK” message on the dialog means the frame lock function is working. • This item can't be selected for no signal and sync out. SERVICE •...

  • Page 55: Network Menu

    Select “NETWORK” from the main menu to access the following functions. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table.
  • Page 56 This function can only be used when DHCP is set to OFF. • The IP ADDRESS is the number that identifies this projector on the network. You cannot have two devices with the same IP ADDRESS on the same network.
  • Page 57 ► button. The PROJECTOR NAME dialog will be displayed. (2) The current PROJECTOR NAME will be displayed on the first 3 lines. If not yet written, the lines will be blank. Use the ▲/▼/◄/► buttons and the ENTER or INPUT button to select and enter characters.
  • Page 58 Use the ▲/▼ buttons. To return to the menu Press the ◄ button on the remote control. To erase the image displayed and its source file in the projector. (1) Press the RESET button on the remote control while displaying an image to display the MY IMAGE DELETE menu.
  • Page 59 Selecting this item displays the NETWORK_INFORMATION dialog for confirming the network settings. INFORMATION • Only the first 16 characters of the projector neme are displayed. • Nothing (blank) is shown in the “PROJECTOR NAME” field until 57). you setup the item ( •...

  • Page 60: Security Menu

    • If an incorrect password is input, the ENTER PASSWORD box will be displayed again. If incorrect password is input 3 times, the projector will turn off. Afterwards the projector will turn off every time an incorrect password is input.
  • Page 61 Item The MyScreen PASSWORD function can be used to prohibit access to the MyScreen function and prevent the currently registered MyScreen image from being overwritten. 1 Turning on the MyScreen PASSWORD 1-1 Use the ▲/▼ cursor buttons on the SECURITY menu to select MyScreen PASSWORD and press the ►...
  • Page 62 If an incorrect PIN Code is input 3 times, the projector will turn off. Afterwards the projector will turn off every time an incorrect PIN code is input. The projector will also turn off if there is no key input for about 5 minutes while the Enter PIN code box is displayed.

  • Page 63: Ransition Detector

    • Please do not forget your TRANSITION DETECTOR password. • This function will activate only when the projector is started after turning off the AC power. • This feature may not function properly if the projector is not in a stable position when the ON is selected.
  • Page 64 SECURITY menu Item The MY TEXT PASSWORD function can prevent the MY TEXT from being overwritten. When the password is set for the MY TEXT; • The MY TEXT DISPLAY menu will be unavailable, which can prohibit changing the DISPLAY setting. •...

  • Page 65: M Y Text Display , M

    Item (1) Use the ▲/▼ cursor buttons on the SECURITY menu to select the MY TEXT DISPLAY and press the ► cursor (or the ENTER) button to display the MY TEXT DISPLAY on/off menu. (2) Use the ▲/▼ cursor buttons on the MY TEXT DISPLAY on/off menu to select on or off.

  • Page 66: Maintenance

    ENTER / the RESET) button. A dialog will appear. (5) Press the ► cursor button to select the “OK” on the dialog. It performs resetting the lamp time. CAUTION ►Do not touch any inner space of the projector, while the lamp is taken out. NOTE •...

  • Page 67: Lamp Warning

    fine particles that come out the plug from the projector's vent holes, and not to get them into your eyes or mouth. from the • Before replacing the lamp, turn the projector off and unplug the power power cord, then wait at least 45 minutes for the lamp to cool sufficiently.

  • Page 68: Cleaning And Replacing The Air Filter

    ►Use only the air filter of the specified type. Do not use the projector without the air filter or the filter cover. It could result in a fire or malfunction to the projector. ►Clean the air filter periodically. If the air filter becomes clogged by dust or the like, internal temperatures rise and could cause a fire, a burn or malfunction to the projector.

  • Page 69: Replacing The Internal Clock Battery

    Consumption of the battery makes the clock not to work correctly. When the clock is wrong or it has stopped, please replace the battery according to the following procedures.. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently. After making sure that the projector has cooled adequately, slowly turn over the projector, so that the bottom is facing.

  • Page 70: Other Care

    Maintenance Other care Inside of the projector In order to ensure the safe use of your projector, please have it cleaned and inspected by your dealer about once every year. Caring for the lens • If the lens is flawed, soiled or fogged, it can cause deterioration in display quality.

  • Page 71: Troubleshooting

    After making sure that the smoke or odor has stopped, contact to your dealer or service company. Otherwise if a problem occurs with the projector, the following checks and measures are recommended before requesting repair.

  • Page 72: Related Messages

    The interior temperature is too high, or has increased or decreased in a short term. Please turn the power off, and allow the projector to cool down at least 20 minutes. After having confirmed the following items, please turn the power on again.

  • Page 73: Regarding The Indicator Lamps

    The lamp does not light, and there is a possibility that interior portion has become heated. Please turn the power off, and allow the projector to cool down at least 20 minutes. After the projector has sufficiently cooled down, please make confirmation of the following items, and then turn the power on again.
  • Page 74 In such a case, disconnect the power cord, and wait at least 45 minutes. After the projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp cover, and then turn the power on again.

  • Page 75: Shutting The Projector Down

    fi xed. Please turn the power off and disconnect the power plug from the power outlet, and allow the projector to cool down at least 45 minutes. After the projector has suffi ciently cooled down, please make confi...
  • Page 76 The audio on your HDMI equipment is not set to Linear PCM. The HDMI input on this projector supports Linear PCM audio only. Check the audio setting on your HDMI equipment. The audio on the HDMI input is muted.
  • Page 77 Correctly connect the HDMI cable. Your HDMI equipment is not compatible with the projector. No pictures This projector can be connected with another equipment or disturbed that has HDMI or DVI connector, but with some equipment pictures are the projector may not work properly.
  • Page 78 Scheduled Power Check the status of the POWER, TEMP, LAMP command does indicators on the control panel of the projector and take not work. countermeasures referring to the table on page 73 and 74. Scheduled Security features are activated and the projector is Input Source locked.
  • Page 79 Phenomenon The lamp is turned off. If the projector is in the standby state, please press the STANDBY/ON button on the projector or the remote control to turn on the lamp. If the POWER, TEMP, LAMP indicators on the control panel of the projector represent...

  • Page 80: Specifications

    Power consumption Temperature range Size Weight (mass) Ports Optional parts Specification Liquid crystal projector 1,024,000 pixels (1280 horizontal x 800 vertical) 180 W UHB 10 W AC 100-120V/3.1A, AC220-240V/1.5A 270 W 5 ~ 35°C (Operating) 333 (W) x 103 (H) x 303 (D) mm * Not including protruding parts.
  • Page 81 Specificationsv [unit: mm]...

Table of Contents