Table of Contents
Advertisement
Technical specifications
Accuracy
± 1 % of full scale, higher accuracy with linearizing function of integrator
Accuracy subject to: On factory approved installations the flowmeter system's totalilzed weight will be within the specified
accuracy when compared to a known weighed material test sample. The test rate must be within the specified range of
the design capacity and held constant for the duration of the test. The minimum material test sample must be equivalent
to a sample obtained at the test flow rate for at least ten minutes running time.
Load cell
construction
degree of protection
excitation
output
non-linearity
hysteresis
non-repeatability
capacity
overload
temperature
Nominal sizes
100, 150, 200, 250 mm (4, 6, 8, 10")
Flow rate
3 to 200 t/h (4 to 220 STPH)
Volumetric capacity
4"/100 mm
6"/150 mm
8"/200 mm
10"/250 mm
SITRANS WF100
Operating Instructions, 08/2021, A5E51108132-AA
17-4 PH (1.4568) stainless steel construction with 304
(1.4301) stainless steel cover.
IP67 rated
10 V DC nominal, 15 V DC maximum
2 mV/V excitation at rated load cell capacity
0.02% of rated output
0.02% of rated output
0.01% of rated output
2, 5, 10, 20 lb
safe 150% of rated capacity
ultimate 300% of rated capacity
-40 to 75ºC (-40 to 167ºF) operating range
-18 to 65ºC (0 to 150ºF) compensated
9.77 m
/hr (345 ft
/hr)
3
3
27.34 m
/hr (966 ft
/hr)
3
3
68.36 m
/hr (2414 ft
/hr)
3
3
107.42 m
/hr (3794 ft
/hr
3
3
8
31
Advertisement
Table of Contents
