Siemens SITRANS SITRANS WF100 Operating Instructions Manual page 24

Hide thumbs Also See for SITRANS SITRANS WF100:

Table of Contents

Commissioning

For example:

If the design flowrate is 6 T/H, then:

Therefore the test weight should be between 162 and 216 g.

If an available test weight of 200 g is used, then:

Perform the zero calibration as described in the Calibration section of the integrator manual.

After the completion of the zero calibration, a span calibration, as described in the integrator

instruction manual, can be performed with the test weight(s) applied.

Operating Instructions, 08/2021, A5E51108132-AA

SITRANS WF100

Table of Contents