Table of Contents
Advertisement
Service and maintenance
Installing the shipping stop
When moving the unit reinstall the shipping stop to prevent damage to the load cell/sensing
plate assembly.
1. With the sensing plate resting in its static position, insert shipping bolt as shown.
2. Tighten the nut against the housing to secure the bolt in place.
①
②
③
④
⑤
Unit repair and excluded liability
All changes and repairs must be done by qualified personnel and applicable safety regulations
must be followed. Please note the following:
• The user is responsible for all changes and repairs made to the device.
• All new components must be provided by the Siemens Milltronics Process Instruments Inc.
• Only repair faulty components.
• Do not re-use faulty components.
30
CAUTION
Sensing plate
Washer
Shipping stop
Nut
SITRANS WF100 housing
Operating Instructions, 08/2021, A5E51108132-AA
SITRANS WF100
Advertisement
Table of Contents
