Page 1
Scan the QR code with your mobile device or follow the link to helpful videos and specifications related to this product. https: STAND- / /vivo us.com/pr Desk M o ducts/stand v002t Tool Monito s Requir Desk M e d: STAND-...
Page 2
Assembl Monito y Steps Steps Step 2 (Continued) Step 1 Option B: STAND- Gr Desk M o mmet Base Attach cap (F) to top of pole (E). For grommet hole mounting, remove screw in top of bolt on clamp (C). Stick rubber pads (J) to bottom of grommet base (I). Attach metal plate (L) to bolt and run through grommet hole into grommet base (I) and thread into pole (D) as shown in diagram.
Page 3
Step 5 (Conti (Continued) Step 4 5 (Conti b Attach pole (E) to pole (D) using pole connector (G). Tighten grub If bolts are too long, spacer (M-F) may be required. screws in pole connector using 3mm allen key (N). Slide cable management clip (H) and bracket (B) onto pole (E) and tighten using 6mm allen key (P).
Page 4
Adjust as Desir Desk M e d If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product. For more VIVO products, check out our website at www.vivo-us.com. Last updated: 04/30/18...
Need help?
Do you have a question about the STAND-V002T and is the answer not in the manual?
Questions and answers