Vivo STAND-V002DU Instruction Manual

Dual monitor gas spring mount

Dual Monito Monitor Gas Sp Gas Spring Spr Gas Sp i ng

Mount

Instruction Manual

Model Monito : STAND- STAND V002DU

Email: help@vivo-us.com

Live chat: www.vivo-us.com

Call: 1-800-371-5654

Scan the QR code with your mobile device or follow the link

to helpful videos and specifications related to this product.

https Spring : STAND- / /vivo us Spring . com/pr Gas Sp o ducts Spring / s Spring t and v002du

Tool Monito s Spring Requir Gas Sp e d: STAND-

phillips screwdriver

Packag e Contents Spring

A (x1)

E (x1)

D (x1)

H (x5)

I (x1)

M A (x4)

M4x12

B (x1)

C (x1)

F (x1)

G (x1)

J (x1)

K (x1)

4mm

5mm

M B (x4)

M C (x4)

M5x12

Table of Contents

Need help?

Do you have a question about the STAND-V002DU and is the answer not in the manual?

Page 1 Spring : STAND- / /vivo us Spring . com/pr Gas Sp o ducts Spring / s Spring t and v002du Tool Monito s Spring Requir Gas Sp e d: STAND-...
Page 2 As Spring s Spring e mbl Monito y Steps Steps Spring Step 1 (Continued) Step 1 1a 4 1a 1 Tighten the clamp to the desktop Install the clamp base support (B) onto the base using the plastic knob. of the monitor stand (A) with bolts (H) using provided 4mm Allen wrench (J).
Page 3 Step 2 Step 4 Insert screws (M-A or M-B) with washers (C) into top two holes of monitor, leaving Remove cables covers as shown from upper and lower arms. 3mm of thread exposed. Hang monitor over slots in VESA plates. Secure monitor with screws and washers in bottom two holes and tighten top screws.
Page 4 Call: 1-800-371-5654 If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product. For more VIVO products, check out our website at www.vivo-us.com. Last updated: 04/27/18...