Vivo STAND-V002P Instruction Manual

Dual monitor stand

Dual Monito Monitor Stand Stand

Instruction Manual

Model Monito : STAND- STAND V002P

Email: help@vivo-us.com

Live chat: www.vivo-us.com

Call: 1-800-371-5654

Scan the QR code with your mobile device or follow the link

to helpful videos and specifications related to this product.

https Requir : STAND- / /vivo us Requir . com/pr Stand o ducts Requir / s Requir t and v002p

Tool Monito s Requir Requir Stand e d: STAND-

phillips screwdriver

Package Contents Requir

A (x1)

C (x1)

F (x1)

G (x1)

3mm

5mm

M B (x4)

M A (x4)

M5x12

M4x12

B (x1)

E (x1)

D (x2)

H (x1)

6mm

M C (x4)

Table of Contents

Need help?

Do you have a question about the STAND-V002P and is the answer not in the manual?

Page 1 Scan the QR code with your mobile device or follow the link to helpful videos and specifications related to this product. https Requir : STAND- / /vivo us Requir . com/pr Stand o ducts Requir / s Requir t and v002p Tool Monito s Requir Requir Stand e d: STAND-...
Page 2 As Requir s Requir e mbl Monito y Steps Steps Requir Step 2 Step 1 Adjust bracket supporter using 3mm allen key (F). Slide cable management clip (D) and base cover (E) on to bottom of pole (B). Thread pole onto base (A). Tighten grub screws in bottom of base (A) using 3mm allen key (F).
Page 3 Step 5 Step 4 Adjust tension in monitor bracket with 6mm allen key (H) as shown Attach two bolts (M-A or M-B) and washers (M-C) to top mounting in diagram. holes of monitor, making sure to leave 3mm of threads exposed. Align bolts (M-A, M-B) in VESA plate.
Page 4 Call: 1-800-371-5654 If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product. For more VIVO products, check out our website at www.vivo-us.com. Last updated: 04/30/18...