Hawking HPS3P User Manual page 85

1. Log in the host of RARP server as the superuser (root).
2. Assign a name corresponding to the print server 's IP
address. You can add this address to the /etc/hosts file,
by adding a line such as:
3. Add the Ethernet address and the host name for the
print server to the /etc/ethers file, by adding a line like:
The Ethernet address of the print server is the Node
ID located on the print server.
4. If your system uses Network Information Services
(NIS), you will need to make changes to the NIS host and
its databases.
5. Check if the RARP daemon is running using the ps and
grep commands. If the RARP daemon is not running on
your host, type "rarpd -a" to run the RARP server.
203.66.191.12
00:00:B4:01:01:01 pserver
pserver