Table of Contents
Advertisement
16.
Press the Insert key to add a new NetWare print
server object. The print server name can be identical to
the PSxxxxxx name printed on the label of the print
server, or you can use an alias name you have assigned
using PSETUP.
17. Press Enter to select the newly created print server.
18. Select "Print Server Configuration."
19. Select "Printer Configuration."
20.
Select Printer 0 (or Printer 1, Printer 2), and press
Enter, then select Parallel LPT1 (or LPT2, LPT3) in the
Type field. If your print server has only one port, you do
not need to configure this Type field.
Advertisement
Table of Contents
