Table of Contents
Advertisement
25. Reset the print server to have the changes take effect.
NOTE: If the print server you have is with multiple
printer connectors, you may create multiple print queues
and printer objects.
Your print server should now be ready to use.
You
should be able to redirect printing to your print server
using a CAPTURE command like the one shown in the
previous section.
5.2.2.2
Configuring as a Remote Printer Mode
The remote printer feature is not available for some print
server models. Make sure that you have created the
NetWare
print
server
with
Type
Remote
using
PCONSOLE utility before you configure the print server.
For more detailed information about PCONSOLE, please
refer to NetWare's manual. You can set up the NetWare
print server and print queue objects by following the
steps below:
1. Run the NetWare PCONSOLE program.
2. Change the current file server, if necessary, using the
Change Current File Server menu selection.
3. Choose the "Print Queue" Information menu selection.
4. Press the Insert key to add a new print queue.
5. Type in a print queue name, like "PQ" or "Q1".
Advertisement
Table of Contents
