8. Press Escape to exit the Print Server Configuration
screen, confirm that the changes should be saved, and exit
PSETUP.
At this point the print server setup is complete. You can
now begin setting up the NetWare print server and print
queue objects:
9.
Run the NetWare PCONSOLE program.
10.
Change the current file server, if necessary, using
the Change Current File Server menu selection.
11. Choose the Print Queue Information menu selection.
12. Press the Insert key to add a new print queue.
13. Type in a print queue name, such as "PQ" or "Q1".
14.
You have now successfully created the print queue
that your print server will serve.
Press the Escape key
until the Available Options main menu is displayed.
15. Select "Print Server Information."