Table of Contents
Advertisement
special requirements for your network, you can use the
quick installation method.
To use this method,
1. Log into your NetWare server as SUPERVISOR.
2. Insert the CD-ROM included with the print server, and
change to the appropriate drive and directory. Ex.
e:\dosutil\
3. Run the INSTALL program.
4. Select your new print server from the displayed list
and press Enter. The name listed will be the same as the
Device Name printed on the back label of your print
server.
5. A list of defaults will be displayed. If you need to
change any of these items, use the arrow keys to choose
the item you need to change, then press Enter to display a
list of choices. When all of the values are correct, select
the Continue Installation item and press Enter.
Advertisement
Table of Contents
