NetBEUI Protocol Support - determines whether or not
the print server supports the NetBEUI network protocol.
POST diagnostic printout - determines whether or not a
diagnostic printout should be printed to the attached
printer.
Save to Print Server button - saves the configuration to
the print server.
Type new password - changes to a new password.
Re-type new password - confirms the new password.
Change password button - saves the new password to the
print server.
The print server will verify your password (it will
ignore the User Name item) when you save your
configuration.
Make sure to reset the print server (described in
section 8.3.11 System Utilities) to let the changes take
effect.