Where To Go Next - Cisco Router IOS XR Getting Started Manual

Where to Go Next

Examples
In the following example, the manual system clock is configured:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# clock timezone pst -8
RP/0/RP0/CPU0:router(config)# commit
RP/0/RP0/CPU0:router(config)# end
RP/0/RP0/CPU0:router# clock set 14:12:00 10 feb 2004
14:12:00.090 PST Tue Feb 10 2004
RP/0/RP0/CPU0:router# clock update-calendar
RP/0/RP0/CPU0:router# show clock
14:12:00.090 PST Tue Feb 10 2004
Related Documents
Related Topic
Descriptions of the clock commands available in the
Cisco IOS XR software
Commands used to configure the NTP
Configuration of the NTP on the Cisco IOS XR software
Where to Go Next
When you have completed the configuration procedures in this chapter, consider the following resources
for additional configuration documentation:
•
•
•
Cisco IOS XR Getting Started Guide
4-46
For information on configuring additional general router features, see
Additional Router Features."
For information on using the Cisco IOS XR software more efficiently, see
Techniques, and Shortcuts."
For information on configuring interfaces, see the hardware documents listed in the
Documents" section on page
Document Title
Cisco IOS XR System Management Command
Reference
Cisco IOS XR System Management Command
Reference
Cisco IOS XR System Management Configuration
Guide
x.
Chapter 4 Configuring General Router Features
Chapter 5, "Configuring
Chapter 6, "CLI Tips,
"Related
OL-10957-02