Command Mode Navigation Example - Cisco Router IOS XR Getting Started Manual

Navigating the Cisco IOS XR Command Modes

Command Mode Navigation Example

The following steps provide an example of command mode navigation:
Start a session by logging in to the router and entering EXEC mode, as shown in the following example:
Step 1
router con0_RP0_CPU0 is now available
Press RETURN to get started.
User Access Verification
Username: iosxr
Password:< secret >
RP/0/RP0/CPU0:router#
From EXEC mode you can issue EXEC commands or enter global configuration mode. Examples of
EXEC commands are the show commands used to display system status and clear commands to clear
counters or interfaces.
Step 2 Enter a question mark at the end of the prompt, or after a command, to display the available options:
RP/0/RP0/CPU0:router# show ?
aaa
adjacency
aliases
aps
arm
arp
as-path-access-list
asic-errors
auto-rp
bgp
buffer-manager
calendar
cdp
cef
cetftp
checkpoint
cinetd
clns
clock
commit
community-list
configuration
--More--
Note
If you belong to a user group that has configuration privileges, you can place the router in the global
Step 3
configuration mode by entering the configure command:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)#
From global configuration mode, you can place the router in a configuration submode, such as interface
Step 4
configuration mode or a protocol-specific configuration mode.
Cisco IOS XR Getting Started Guide
4-22
Show AAA configuration and operational data
Adjacency information
Display alias commands
SONET APS information
IP ARM information
ARP table
List AS path access lists
ASIC error information
Auto-RP Commands
BGP show commands
Show all buffer manager memory related information
Display the system calendar
CDP information
Cisco Express Forwarding
CRS-1 control plane ethernet TFTP server
Show checkpoint services
Cisco inetd services
Display CLNS related information
Display the system clock
Show commit information
List community-list
Contents of Non-Volatile memory
The commands available to you depend on the router mode and your user group assignments.
Chapter 4 Configuring General Router Features
OL-10957-02